2010-2015 Ford C-Max Focus Galaxy Mondeo Flip Remote Key 433Mhz (Aftermarket)

Key programming:

• virgin transponder
• Keys can be added.
• If they are deleted, it is necessary to program at least 2 keys.

Command programming:

Remote control is programmed manually with the following procedure.

• With the door closed and the seat belt on, insert the key into the ignition and turn it from OFF to ON 4 times within 20 seconds.
• Remove the key from the ignition.
• Press any button, on some models you will hear an acoustic signal indicating that you have opened the button. the programming mode correctly and another to indicate that the remote control was successfully programmed. On other occasions you only hear the  when receiving and recording the signal from the new remote control.
• All controls that are not present will be deleted and existing controls must be added again following the previous step.
• Turn the ignition from ON to OFF and open and close the door to exit programming mode then check the controls.

• Zedfull: DST PLUS 6F / 63 FORD
• Tango: LKP – 02 DST 4D / ID63-6F
• Keydi: 4D 83 / DST 80
• Handy: 4D 63 / DST 80
• VVDI: 4D+DST80
• Clonable: YES