Key programming:
- Virgin transponder (coil)
- Pin code required
- All keys present
- You cannot add keys, it is “NECESSARY” program for the remote to be programmed.
Command programming:
Remote is programmed automatically when programming the key, but requires a synchronization procedure:
-
- Once the key programming procedure has been carried out, it is necessary to turn the ignition ON and press and hold the close button for 5 seconds
- Release the button, remove the ignition
< li>Wait 30 seconds (until the panel or courtesy light turns off) with all the doors closed, check the control.
Transponder:
- Zedfull: 7941A / HITAG 2
- Tango: 7941A / PASSWORD
- Keydi: 7941 / 46
- Handy: 7941 / TYPE 46
- VVDI: ID46 / HITAG 2
- Clonable: YES
