Key programming:
- Virgin transponder (coil)
- Pin code required
- All keys present
- You cannot add keys, it is “NECESSARY” program for the remote to be programmed.
Remote programming:
Remote is programmed automatically when programming the key, but requires a synchronization procedure:
-
- Once the key programming procedure has been completed, it is necessary to turn the ignition ON and press and hold the close button for 5 seconds
< li>Release the button, turn off the ignition
- Wait 30 seconds (until the dashboard or courtesy light goes off) with all the doors closed, check the control.
</ul >
Key Profile:
VA2
Transponder:
- Zedfull: 7941A / HITAG 2 46
- Tango: 7941A / PASSWORD
- Keydiy: 7941 / 46
- Handy: 7941 / TYPE 46
- VVDI: ID46 / HITAG 2 7941
- Clonable: YES
